Free of IBOA (isobornyl acrylate), a known skin sensitizer
Cure using UV/LED light
One-part formulation – no mixing
Light + moisture cure products for shadow area curing
Solvent free
Low-sensitizing ingredients
Skin friendly
Free of IBOA (isobornyl acrylate)
Formulated without TPO, a material of concern
Pass ISO 10993-10 / -23 for sensitization & irritation
Cure with UV/LED light
One-part formulations – no mixing
Pass ISO 10993-5 Cytotoxicity
Solvent free
Biocompatible formulations
Encompass® technology (some products)
Cure with UV/Visible light in seconds
Optically clear
Excellent light transmission properties
High strength
Low stress
Low shrinkage and outgassing properties result in low movement
One component - no mixing
Solvent free
Cure in seconds using LED, UV/Visible light
Secondary moisture cure for shadow areas
Encompass technology available (some products)
Flouresce under low-intensity black light (some products)
Solvent free
Moisture resistant
Cure through UV blocked plastics
Low shrinkage
Low stress
Soft and flexible
Hard, clear bonds
Cure within seconds using UV/Visible light
Multi-Cure - secondary heat cure for shadow areas
Activator cure products available
Acid-free
Non-corrosive
Non-flammable
Suitable for harsh environments
Resistant to high temperatures & moisture
Clear, flexible bonds in some products
Cure with LED or UV/Visible light in seconds
Conform to complex shapes
Easy to apply and remove from non-porous surfaces
Single layer coverage
Solvent free & 100% solids
Increase in production and floor space
Replace time-consuming tape, wax and lacquer masking methods
Cure in seconds with LED or UV/Visible light
One-part formulation - no mixing
Solvent free
Electrically insulating
Multiple viscosities available
Formulations to address shadow areas with secondary heat or moisture cure
Halogen-free formulations
IPC approval, MIL-46058C and UL listed self-extinguishing grades
NASA low outgassing meets ASTM E595 (some products)
MIL-Std 883 Method 5011 (some products)
Cure in seconds with UV/LED light
Solvent-free - no mixing
Halogen free (available in some products)
Stand up to moisture and shock
Dispense blue maskant to confirm application (available in some products)
Color change formulations to confirm proper cure (available in some products)
Cure in seconds with UV/LED light
Solvent free - no mixing
Halogen-free (available in some products)
Stand up to moisture and shock
See-Cure technology available in (9309-SC)
Lower product costs
Reduced life-cycle costs
Low ecological impact
Most products are certified as halogen free
Color change See-Cure technology (some products)
IPC approved
Meet or exceed standards set forth in IEC 61249-2-21
MIL-I-46058C and UL listed self-extinguishing grades available
Encapsulants cure in seconds with UV/LED light
Solvent free
Low movement and temperature variations
Resistance to humidity and thermal shock
UL-V0 flammability rated
Fluorescing materials available
One part formulation - no mixing
Cure with LED or UV/Visible light in seconds
Enhance shock and vibration resistance of electronic assemblies
Highly thixotropic for zero movement prior to cure
Low modulus for minimal stress in component interfaces
Easy rework – no residue on solder pads or between solder balls
Available with See-Cure Technology to confirm complete cure
Exhibit improved bond strength for die and pry testing
Halogen & silicone free
RoHS Compliant
Cure with LED or UV/Visible light
Instant fixture for immediate movement to next process
High viscosity and highly thixotropic properties
Halogen-free formulations available
Remain in place prior to part being mated
Long-term reliability
No heat exposure required
Minimal expansion during thermal rise
No refrigeration necessary
Cure with LED or UV/Visible light
Full cure in 10-30 seconds
Increased manufacturing floor space
Lower inventory costs
Replace epoxy and silicone materials
Halogen-free formulations available
Cure with LED or UV/Visible light
Complete cure in seconds
Residue free upon removal
One part formulation - no mixing
Solvent free
Silicone free
Replace tape, wax and lacquer waxing methods
Cure with LED or UV/Visible light
Complete cure in seconds
Non-yellowing for increased light transmission, enhanced brightness, optical clarity, and better contrast ratios
Excellent bond strength
Superior re-workability for easy removal or repair
Easy flow characteristics for flat panel lamination
Excellent thermal shock resistance
Low shrinkage minimizes visible distortion after cure
Reduces entrapment and bubbles for ripple-free bonds
Solvent free
Cure with LED or UV/Visible light
Fast, tack free cure in seconds
Secondary heat or moisture cure available
One part formulation - no mixing
Optically clear, no yellowing
Solvent free
Resistant to humidity and thermal shock
Electrically insulating
Room temperature ship and storage
Cure with LED or UV/Visible Light
Complete cure in seconds
Excellent adhesion to glass, Kapton, PMMA, ceramic, silicon, lead frame, flex circuit, FR4, ABS, and LCP
Withstand moisture, heat and shock
One part formulation - no mixing or diluting
Solvent free
Cure with LED or UV/Visible light
Complete cure in seconds
Withstand moisture, heat, and shock
One part formulations - no mixing or diluting
Solvent free
Excellent adhesion to glass, Kapton, PMMA, ceramic, silicon, lead frame, flex circuit, FR-4, ABS, LCP
Quickly cures with UV/Visible light
See-Cure - dispense blue, cures clear for confirmation of placement
Spray or dip applications
One component - no mixing
Easily incorporate into automated systems
Reduce labor, rework and scrap
Solvent free
Cure using LED or UV/Visible light
Encompass® technology -features both See-Cure and Ultra Red® technologies (some products)
See Cure - dispenses one color, cures another (some products)
Ultra-Red® - fluoresces bright red (some products)
Solvent Free
One component - no mixing
Rapid cure using LED/UV/Visible light
Compatible with gamma, EtO, and E-Beam sterilization
ISO 10993 approved
See-Cure - dispense one color, changes color upon complete cure
Ultra-Red - fluoresces under blacklight
Solvent free
One component - no mixing
Ability to bond at line speeds greater than 20 ft/min
Cure within seconds using LED or UV/Visible light
LED-curable materials available
Single component - no mixing
Compatible with gamma, EtO, and E-Beam sterilization
Fluoresce for easy in-line quality inspection
Solvent free
Cure using LED or UV/Visible light
See-Cure - for confirmation of adhesive placement
Fluoresce under blacklight for easy quality inspection
Solvent free
Secondary heat-cure capability for shadow areas
Single component, no mixing
Compliant with ISO 10993
Compatible with gamma, EtO, and E-Beam sterilization
ISO 10993 approved
Rapid cure using LED or UV/Visible light
LED curable formulations available
Secondary heat-cure capability for shadow areas
See-Cure - dispense blue, cure clear
Fluoresces under blacklight for easy visual confirmation
Strong bonds for Nylon 12 and PEBA
One component - no mixing
Solvent free
Concentrated 12.7 cm x 12.7 cm curing area
Rugged brushed-aluminum construction
Low-cost UV cures for bonded areas larger than 1/2 inch² or small batch processing
UV curing flood lamps can be conveyor mounted or used as stand-alone, bench-top systems
20.3 cm x 20.3 cm curing area
Rugged brushed-aluminum construction
Ideal for batch processing and the UV curing of large areas
UV curing flood lamps can be conveyor mounted or used as stand-alone, bench-top systems
>17,000 mW/cm²
Patented intensity adjustment feature
LCD display
Compatible with liquid, fiber, single-pole, or multi-pole lightguides
Integrate with pedal or PLC
Extended exposure time settings to 9,999.9 seconds
Integral shutter with digital timer
Fast bulb replacement
Helps light-curing system maintain consistent intensity and dosage levels
Provides a worker friendly light-curing process by measuring stray or reflected energy
Measure the light intensity transmission rate through the substrate to ensure an effective cure
Measurement range up to 40W/cm²
Only one calibration per year
Durable temperature-resistant sensor
Comes with sturdy carrying case
PTB and NIST traceable
Measures range up to 40 W/cm²
Sensitive at measuring stray or reflected visible light (as little as 1 mW/cm²)
Only one calibration per year
Set screw locks lightguide in place
PTB and NIST traceable
Can measure energy levels emitted from lightguides (3 mm, 5 mm, and 8 mm), BlueWave® QX4® LED heads, and LED flood lamps
Possesses a spectral sensitivity range of 350 – 450 nm
Intensity measurement from 1 mW/cm² to 40 W/cm²
Ideal for measuring LED curing source energy levels
Specially designed photo-sensor assembly provides repeatable measurements and protection from high temperatures
5” x 5” curing area
High intensity and uniformity
All-in-one design (controller, emitter & power supply)
Quiet, low noise system
Optimization of application-specific frequency emissions by changing only the emitter
Intuitive user interface
Provides system status and troubleshooting
PLC activation and control
Control and monitor power levels, exposure times/routines, system health and safety lockout via PLC interface
One controller to four LED heads for maximum application flexibility
LED heads for 365, 385, or 405 nm
LED heads can be programmed independently
Interchangeable/replaceable focusing lenses in 3-, 5-, and 8-mm diameters
Instant on-off – no warm-up period
Efficient LED temperature management
PLC touch screen interface